- per page
Matthews | C-Stand Kit | 40"
This kit includes ...
This kit includes:
- Matthews 40" Riser
- Matthews Turtle Base
- Matthews Arm and Gobo
Daily | 3-7 Days | 4 Weeks |
---|---|---|
$10.00 | $30.00 | $90.00 |
Matthews | Centipede | Wheels
This kit includes ...
- Offers smooth dolly track shots for camera dollies
- The Centipede is equipped with staggered wheels (back wheels are larger than the front set), allowing for easier turning and braking
Daily | 3-7 Days | 4 Weeks |
---|---|---|
$75.00 | $225.00 | $675.00 |
Matthews | China Silk | Solid Frame | 48"x48"
This kit includes ...
- 48x48" China Silk
Daily | 3-7 Days | 4 Weeks |
---|---|---|
$15.00 | $45.00 | $135.00 |
Matthews | Crank - O - Vator III | Studio | 12'
This kit includes ...
- Load Capacity: 200 lb
- Max Height: 11.3'
- Min Height: 4.7'
- Folded Length: 5.2'
Daily | 3-7 Days | 4 Weeks |
---|---|---|
$55.00 | $165.00 | $495.00 |
Matthews | Doorway Dolly
This kit includes ...
- Constructed with a wooden platform attached to a steel tubing frame. The platform is fitted with a recessed camera tie-down and is carpeted for a non-slip, low maintenance surface
- Steering is accomplished with the use of a pull handle similar to a wagon, or it may be used in a secured upright position
- There is an angled fitting to allow the push bar to tilt down 340 for more clearance between the Dolly and the operator
Daily | 3-7 Days | 4 Weeks |
---|---|---|
$125.00 | $375.00 | $1,125.00 |
Matthews | Doorway Dolly | Kit
This kit includes ...
This kit includes:
- Matthews Doorway Dolly
- 2x Matthews Doorway Dolly Side Panel Attachment
Daily | 3-7 Days | 4 Weeks |
---|---|---|
$125.00 | $375.00 | $1,125.00 |
Matthews | Doorway Dolly | Track | Curved | 8'
This kit includes ...
- Manufactured from 1010-alloy cold rolled welded tube
- Track rails and other components are chrome plated to maintain smoothness and help protect against the environment
Daily | 3-7 Days | 4 Weeks |
---|---|---|
$40.00 | $120.00 | $360.00 |
Matthews | Doorway Dolly | Track | Kit
This kit includes ...
This kit includes:
- Matthews Doorway Dolly Track Straight 8'
- 2x Matthews Centipede Wheels
Daily | 3-7 Days | 4 Weeks |
---|---|---|
$175.00 | $525.00 | $1,575.00 |
Matthews | Doorway Dolly | Track | Straight | 8'
This kit includes ...
- Manufactured from 1010-alloy cold rolled welded tube
- Chrome plated to maintain smoothness and help protect against the environment
Daily | 3-7 Days | 4 Weeks |
---|---|---|
$20.00 | $60.00 | $180.00 |
Matthews | Dot & Finger Kit
This kit includes ...
- Sizes range from 3 to 10", suitable for small to medium product setups, or full-length portraits
Daily | 3-7 Days | 4 Weeks |
---|---|---|
$50.00 | $150.00 | $450.00 |
Matthews | Double Riser | Low Boy | 9.5'
This kit includes ...
- Designed for larger lighting fixtures, built with steel legs & riser assembly
- Equipped with universal 1-1/8" Posi-V-Lock female with pop up 5/8" male receiver
Daily | 3-7 Days | 4 Weeks |
---|---|---|
$15.00 | $45.00 | $135.00 |
Matthews | Duck Bill | Platypus Clamp
This kit includes ...
- Ideal solution for positioning foam core, reflector, or bead board
Daily | 3-7 Days | 4 Weeks |
---|---|---|
$5.00 | $15.00 | $45.00 |
Matthews | Extendellini | Matthellini Clamp | Center Jaw
This kit includes ...
- Extends Grip of Clamp by 10"
Daily | 3-7 Days | 4 Weeks |
---|---|---|
$4.00 | $12.00 | $36.00 |
Matthews | Flag Kit | 18x24"
This kit includes ...
This kit includes:
- Flag 18"x24"
- Open End Scrim 18"x24" Single Black
- Open End Scrim 18"x24" Double Black
- Open End Scrim 18"x24" Halo Silk White
Daily | 3-7 Days | 4 Weeks |
---|---|---|
$28.00 | $84.00 | $252.00 |
Matthews | Flag Kit | 24x36"
This kit includes ...
This kit includes:
- Flag 24"x63"
- Open End Scrim 24"x36" Halo Silk
- Open End Scrim 24"x36" Single Black
- Open End Scrim 24"x36" Double Black
Daily | 3-7 Days | 4 Weeks |
---|---|---|
$27.00 | $81.00 | $243.00 |
Matthews | Grip Helper Jr | Black
This kit includes ...
- The Junior Pin mounts into a light stand, the Junior Receiver allows the mounting of a light fixture without upsetting the center of balance
- In between, there is a 3 to 6' telescopic extension arm fixed at 45° with a 4-1/2 in Grip Head
Daily | 3-7 Days | 4 Weeks |
---|---|---|
$13.00 | $39.00 | $117.00 |
Matthews | Jr Offset Arm | 2k Receiver | Extendable
This kit includes ...
- Extends from 18 to 25"
- This Junior Extendable Offset Arm terminates in double 1-1/8" pins
Daily | 3-7 Days | 4 Weeks |
---|---|---|
$10.00 | $30.00 | $90.00 |
Matthews | Junior 2K | Triple Header
This kit includes ...
- Especially useful when several light fixtures are needed in a relatively small area
Daily | 3-7 Days | 4 Weeks |
---|---|---|
$5.00 | $15.00 | $45.00 |
Matthews | Junior Stand Extension | 3'
This kit includes ...
- Made from heavy wall steel pipe, this extension fits into any Cine, or heavy duty stand that has a Junior Receiver
- It terminates in a Junior Receiver, with a 5/8 pop-up pin
Daily | 3-7 Days | 4 Weeks |
---|---|---|
$5.00 | $15.00 | $45.00 |
Matthews | Matthboard | Silver | 42"x42"
This kit includes ...
- Lightweight reflector
Daily | 3-7 Days | 4 Weeks |
---|---|---|
$20.00 | $60.00 | $180.00 |
Matthews | Matthellini Clamp | Center Jaw | 2" |
This kit includes ...
- Provides strong, solid gripping of round, square or rectangular tubing and many other common and irregular shapes
Daily | 3-7 Days | 4 Weeks |
---|---|---|
$7.00 | $21.00 | $63.00 |
Matthews | Meat Axe
This kit includes ...
- Meat Axe Flag
Daily | 3-7 Days | 4 Weeks |
---|---|---|
$20.00 | $60.00 | $180.00 |
Matthews | Medium Roller Stand | 14'
This kit includes ...
- Utilizes all steel tubes and leg
- Developed for flying Butterflies and Overheads on location, these stands feature wide bases for stability, and terminate in the new 4.5" Grip Head
Daily | 3-7 Days | 4 Weeks |
---|---|---|
$15.00 | $45.00 | $135.00 |
Matthews | Mombo Combo Stand | 24.5'
This kit includes ...
- Rocky Mountain Leg
Daily | 3-7 Days | 4 Weeks |
---|---|---|
$25.00 | $75.00 | $225.00 |
- per page