Lighting

• Holds any 2 Dionic 160, HC, or HCX batteries
• Allows for simultaneous 14.4 and 28V output via its 8-pin LEMO connector

• 90Wh Lithium-Ion Gold-Mount Battery
• Supports up to 12A Continuous Draw
• Fuse Link Technology Cell Protection

• Enlarged, Spacious Honeycomb Interior
• Individually Wrapped, Isolated Cells
• Increased Airflow & Heat Dissipation

• Enlarged, Spacious Honeycomb Interior
• Individually Wrapped, Isolated Cells
• Increased Airflow & Heat Dissipation
• 1000 Charge / Discharge Cycles

• 91Wh Peak (83 Wh Typical)
• 14.4 VDC
• 10 Amps

• Capacity - 120WH
• Output voltage - 14.4 VDC
• Sustains a 10 amp draw
• Runs a 40W camera with a 20W light for up to 2 hours

This kit includes:

• Anton Bauer Battery VCLX
• Anton Bauer Charger VCLX
• 2x Anton Bauer Charger Cable VCLX
• AC Power Cord 3-Pin 18 AWG
• XLR 4-Pin Power 10'

This kit includes:

• Aputure Light Dome Mini II (21.5") Softbox
• Light Dome Mini II 40 degree Grid
• Light Dome Mini II Grid Cloth Diffusion
• Light Dome Mini II Inner Gold Silver Baffle
• Light Dome Mini II Gel Holder

This kit includes:

• Aputure Light Dome (35") Softbox
• Aputure Speedring
• Aputure Softbox Inner Baffle
• Aputure Softbox Outer Baffle

• Diffuses and Eliminates Hot Spot
• Soft Slip-on Accessory

• Narrows the beam spread provided by the Broncolor Softlight Reflector

• Will project a non-color fringing, hard light circle from 5 to 30" @ 6.5'
• Project transparencies with 35mm and medium format slide holders

• 20.4" (51.75cm) in diameter and has a 7.7" (20.4cm) deep silver interior

• 20.4" (51.75cm) in diameter and has a 7.7" (20.4cm) deep white interior
• Integral counter-reflector provides optimum softening with ~90° dispersion

• Reflector with parabolic mirror, 60 cm diameter, with a special surface coating
• In combination with the special additional reflector you can achievea high light output and reduce the amount of stray light

• For Pulso Mount Lamp Heads

• This reflector is designed for use on all Broncolor flash heads. It is considered a wide-angle reflector
• It's beam spread is 120° from the point of origin 
• Its front diameter is 8.5"

• This reflector is designed for use on all Broncolor flash heads. It is considered a narrow-angle reflector
• It's beam spread is 45° from the point of origin. Its front diameter is 11.5"

• This is a reflector designed specifically for use on Broncolor's Pulso 8, Twin, and HMI light heads
• It provides a beam spread of 50° from the point of origin, and has a diameter of 13.5"

• 10 Degree Grid for Broncolor P50

• 20 Degree Grid for Broncolor P50